Feeds:
Posts
Comments

Archive for March, 2008

If you asked me, it’s the real step to fix the web cam problem? I will answer, I don’t know. I just found that it suddenly works.

At least if you know what I did before, it may work to you too.

But, I don’t want to put you on trouble if you fail. So, if you want to try, try it in your on risk.

There are 2 trials that I’ve done before.

First Test. Using original driver from Toshiba (failed)

 

First, I install ndiswrapper application because I don’t have it.

taufanlubis@toshiba:~$ sudo apt-get install ndiswrapper-common ndiswrapper-utils-1.9

[sudo] password for taufanlubis:

Reading package lists… Done

Building dependency tree

Reading state information… Done

The following packages were automatically installed and are no longer required:

mplayer-skins mplayer libggi2 libgii1 libgii1-target-x youtube-dl

Use ‘apt-get autoremove’ to remove them.

Suggested packages:

ndiswrapper-source

The following NEW packages will be installed:

ndiswrapper-common ndiswrapper-utils-1.9

0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.

Need to get 52.7kB of archives.

After unpacking 238kB of additional disk space will be used.

Get:1 http://archive.ubuntu.com gutsy/main ndiswrapper-common 1.43-1ubuntu2 [19.2kB]

Get:2 http://archive.ubuntu.com gutsy/main ndiswrapper-utils-1.9 1.43-1ubuntu2 [33.5kB]

Fetched 52.7kB in 2s (25.0kB/s)

Selecting previously deselected package ndiswrapper-common.

(Reading database … 130825 files and directories currently installed.)

Unpacking ndiswrapper-common (from …/ndiswrapper-common_1.43-1ubuntu2_all.deb) …

Selecting previously deselected package ndiswrapper-utils-1.9.

Unpacking ndiswrapper-utils-1.9 (from …/ndiswrapper-utils-1.9_1.43-1ubuntu2_i386.deb) …

Setting up ndiswrapper-common (1.43-1ubuntu2) …

Setting up ndiswrapper-utils-1.9 (1.43-1ubuntu2) …

taufanlubis@toshiba:~$

Then I install my windows driver with Ndiswrapper.

You have to go back to your original Windows and copy the web cam driver files or may be you have to download from Toshiba website.

taufanlubis@toshiba:~/MyData/driver_webcam$ ls -lh

total 24K

-rwx—— 1 taufanlubis taufanlubis 1.7K 2007-02-06 11:40 UVCFTR.inf

-rwx—— 1 taufanlubis taufanlubis 18K 2007-01-27 08:13 UVCFTR_S.sys

taufanlubis@toshiba:~/MyData/driver_webcam$ sudo ndiswrapper-1.9 -i UVCFTR.inf

installing uvcftr …

I checked ndiswrapper’s driver list

taufanlubis@toshiba:~/MyData/driver_webcam$ ndiswrapper -l

uvcftr : driver installed

device (04F2:B008) present

taufanlubis@toshiba:~/MyData/driver_webcam$

I loaded ndiswrapper module

taufanlubis@toshiba:~/MyData/driver_webcam$ sudo modprobe ndiswrapper

Finally checked the loaded module in kernel ring buffer

taufanlubis@toshiba:~$ dmesg | grep 04f2:b008

[ 15.280000] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)

Done.

Now, I need an application to test it. So, I downloaded Camorama, it didn’t work. Still not recognized the video device.

Then I tried with EasyCam2, also did not work.

Finally, I tested with XawTV.

taufanlubis@toshiba:~$ sudo apt-get install xawtv

Reading package lists… Done

Building dependency tree

Reading state information… Done

xawtv is already the newest version.

0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.

taufanlubis@toshiba:~$

Not working, BUT, when use ARROWdown key, the blue light of the webcam is TURN ON.

But still nothing happen.

I stopped it.

 

Second trial, using gspca-source driver (failed)

taufanlubis@toshiba:~$ sudo apt-get install gspca-source linux-headers-$(uname -r)

Reading package lists… Done

Building dependency tree

Reading state information… Done

linux-headers-2.6.22-14-generic is already the newest version.

The following extra packages will be installed:

debhelper html2text intltool-debian module-assistant po-debconf

Suggested packages:

dh-make kernel-package

Recommended packages:

libmail-sendmail-perl libcompress-zlib-perl

The following NEW packages will be installed:

debhelper gspca-source html2text intltool-debian module-assistant po-debconf

0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.

Need to get 1030kB of archives.

After unpacking 2769kB of additional disk space will be used.

Do you want to continue [Y/n]? y

Get:1 http://archive.ubuntu.com gutsy/main html2text 1.3.2a-3build1 [90.6kB]

Get:2 http://archive.ubuntu.com gutsy/main intltool-debian 0.35.0+20060710.1 [31.6kB]

Get:3 http://archive.ubuntu.com gutsy/main po-debconf 1.0.9 [117kB]

Get:4 http://archive.ubuntu.com gutsy/main debhelper 5.0.51ubuntu3 [526kB]

Get:5 http://archive.ubuntu.com gutsy/universe module-assistant 0.10.11 [100kB]

Get:6 http://archive.ubuntu.com gutsy/universe gspca-source 01.00.16-1-1 [165kB]

Fetched 1030kB in 37s (27.7kB/s)

Selecting previously deselected package html2text.

(Reading database … 111318 files and directories currently installed.)

Unpacking html2text (from …/html2text_1.3.2a-3build1_i386.deb) …

Selecting previously deselected package intltool-debian.

Unpacking intltool-debian (from …/intltool-debian_0.35.0+20060710.1_all.deb) …

Selecting previously deselected package po-debconf.

Unpacking po-debconf (from …/po-debconf_1.0.9_all.deb) …

Selecting previously deselected package debhelper.

Unpacking debhelper (from …/debhelper_5.0.51ubuntu3_all.deb) …

Selecting previously deselected package module-assistant.

Unpacking module-assistant (from …/module-assistant_0.10.11_all.deb) …

Selecting previously deselected package gspca-source.

Unpacking gspca-source (from …/gspca-source_01.00.16-1-1_all.deb) …

Setting up html2text (1.3.2a-3build1) …

Setting up intltool-debian (0.35.0+20060710.1) …

Setting up po-debconf (1.0.9) …

Setting up debhelper (5.0.51ubuntu3) …

Setting up module-assistant (0.10.11) …

Setting up gspca-source (01.00.16-1-1) …

taufanlubis@toshiba:~$

taufanlubis@toshiba:/usr/src$ ls

alsa linux-headers-2.6.22-14 realplay

gspca-source.tar.bz2 linux-headers-2.6.22-14-generic

taufanlubis@toshiba:/usr/src$ sudo bunzip2 gspca-source.tar.bz2

taufanlubis@toshiba:/usr/src$ ls

alsa linux-headers-2.6.22-14 realplay

gspca-source.tar linux-headers-2.6.22-14-generic

taufanlubis@toshiba:/usr/src$ ls

alsa linux-headers-2.6.22-14 realplay

gspca-source.tar linux-headers-2.6.22-14-generic

taufanlubis@toshiba:/usr/src$ sudo mkdir gspca-source

taufanlubis@toshiba:/usr/src$ sudo mv gspca-source.tar /usr/src/gspca-source

taufanlubis@toshiba:/usr/src$ ls

alsa linux-headers-2.6.22-14 realplay

gspca-source linux-headers-2.6.22-14-generic

taufanlubis@toshiba:/usr/src$

taufanlubis@toshiba:/usr/src$ cd gspca-source/

taufanlubis@toshiba:/usr/src/gspca-source$ sudo tar -xf gspca-source.tar

taufanlubis@toshiba:/usr/src/gspca-source$ ls -l

total 1260

-rw-r–r– 1 root root 1280000 2007-05-04 01:27 gspca-source.tar

drwxr-xr-x 3 root root 4096 2007-05-04 01:27 modules

taufanlubis@toshiba:/usr/src/gspca-source$ cd modules/

taufanlubis@toshiba:/usr/src/gspca-source/modules$ ls -l

total 4

drwxr-xr-x 15 root root 4096 2008-03-02 21:31 gspca

taufanlubis@toshiba:/usr/src/gspca-source/modules$ cd gspca/

taufanlubis@toshiba:/usr/src/gspca-source/modules/gspca$ ls -l

total 2648

-rw-r–r– 1 root root 3043 2007-04-26 20:52 changelog

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 Conexant

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 debian

drwxr-xr-x 2 root root 4096 2008-03-02 21:31 decoder

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 Etoms

-rwxr-xr-x 1 root root 919 2006-05-07 22:45 gspca_build

-rw-r–r– 1 root root 122885 2007-04-26 20:35 gspca_core.c

-rw-r–r– 1 root root 621336 2008-03-02 21:31 gspca_core.o

-rw-r–r– 1 root root 13888 2007-03-19 00:03 gspca.h

-rw-r–r– 1 root root 917584 2008-03-02 21:31 gspca.ko

-rw-r–r– 1 root root 13111 2008-03-02 21:31 gspca.mod.c

-rw-r–r– 1 root root 61048 2008-03-02 21:31 gspca.mod.o

-rw-r–r– 1 root root 857654 2008-03-02 21:31 gspca.o

-rwxr-xr-x 1 root root 1957 2007-04-26 20:45 Makefile

-rw-r–r– 1 root root 1672 2007-03-18 22:41 Makefile.kld

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 Mars-Semi

-rw-r–r– 1 root root 0 2008-03-02 21:31 Module.symvers

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 Pixart

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 Sonix

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 Sunplus

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 Sunplus-jpeg

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 Transvision

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 utils

drwxr-xr-x 2 root root 4096 2007-05-04 01:27 Vimicro

taufanlubis@toshiba:/usr/src/gspca-source/modules/gspca$

taufanlubis@toshiba:/usr/src/gspca-source/modules/gspca$ sudo make

make -C /lib/modules/`uname -r`/build SUBDIRS=/usr/src/gspca-source/modules/gspca CC=cc modules

make[1]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic’

CC [M] /usr/src/gspca-source/modules/gspca/gspca_core.o

CC [M] /usr/src/gspca-source/modules/gspca/decoder/gspcadecoder.o

LD [M] /usr/src/gspca-source/modules/gspca/gspca.o

Building modules, stage 2.

MODPOST 1 modules

CC /usr/src/gspca-source/modules/gspca/gspca.mod.o

LD [M] /usr/src/gspca-source/modules/gspca/gspca.ko

make[1]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic’

taufanlubis@toshiba:/usr/src/gspca-source/modules/gspca$

taufanlubis@toshiba:/usr/src/gspca-source/modules/gspca$ sudo make install

mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb/media/

rm -f /lib/modules/`uname -r`/kernel/drivers/usb/media/spca5xx.ko

rm -f /lib/modules/`uname -r`/kernel/drivers/media/video/gspca.ko

install -c -m 0644 gspca.ko /lib/modules/`uname -r`/kernel/drivers/usb/media/

/sbin/depmod -ae

taufanlubis@toshiba:/usr/src/gspca-source/modules/gspca$

taufanlubis@toshiba:/usr/src/gspca-source/modules/gspca$ sudo modprobe gspca

taufanlubis@toshiba:/usr/src/gspca-source/modules/gspca$

taufanlubis@toshiba:/usr/src/gspca-source/modules/gspca$ cd /dev

taufanlubis@toshiba:/dev$ sudo chmod a+rw video0

taufanlubis@toshiba:/dev$ ls -l video0

crw-rw-rw- 1 root video 81, 0 2008-03-02 20:14 video0

taufanlubis@toshiba:/dev$

When I tried with camorama, XawTV and easycam also did not work.

But, few weeks later, I don’t know why I can saw my face in my wecam with aMsn. Is chicony web cam only work with aMsn? I don’t know.

fixwebcam01.png

Then I double-click to have a chat with my friend.

fixwebcam02.png

To try to use my web cam.

fixwebcam03.png

I still don’t know the answer. But, it works.

fixwebcam04.png

Check the mic, it works.

fixwebcam05.png

fixwebcam06.png

fixwebcam07.png

That’s it. Any idea?

Read Full Post »

Kraptor is classic shoot them up scroll game. It’s almost like very famous game Raptor. Made by code name ‘Kronoman’ from Argentina in purpose of memorial of his father. I thinks it’s free cool game.

Installation

From Ubuntu Terminal screen (Applications > Accessories > Terminal), type:

taufanlubis@toshiba:~$ sudo apt-get install kraptor

[sudo] password for taufanlubis:

Reading package lists… Done

Building dependency tree

Reading state information… Done

The following packages were automatically installed and are no longer required:

conquest-libs overgod-data

Use ‘apt-get autoremove’ to remove them.

The following extra packages will be installed:

kraptor-data libaldmb1 libdumb1

The following NEW packages will be installed:

kraptor kraptor-data libaldmb1 libdumb1

0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.

Need to get 10.2MB of archives.

After unpacking 11.4MB of additional disk space will be used.

Do you want to continue [Y/n]? y

Get:1 http://archive.ubuntu.com gutsy/universe libdumb1 1:0.9.3-5 [192kB]

Get:2 http://archive.ubuntu.com gutsy/universe libaldmb1 1:0.9.3-5 [94.3kB]

Get:3 http://archive.ubuntu.com gutsy/universe kraptor-data 0.0.20040403-4 [9882kB]

Get:4 http://archive.ubuntu.com gutsy/universe kraptor 0.0.20040403-4 [52.8kB]

Fetched 10.2MB in 1m29s (115kB/s)

Selecting previously deselected package libdumb1.

(Reading database … 125784 files and directories currently installed.)

Unpacking libdumb1 (from …/libdumb1_1%3a0.9.3-5_i386.deb) …

Selecting previously deselected package libaldmb1.

Unpacking libaldmb1 (from …/libaldmb1_1%3a0.9.3-5_i386.deb) …

Selecting previously deselected package kraptor-data.

Unpacking kraptor-data (from …/kraptor-data_0.0.20040403-4_all.deb) …

Selecting previously deselected package kraptor.

Unpacking kraptor (from …/kraptor_0.0.20040403-4_i386.deb) …

Setting up libdumb1 (1:0.9.3-5) …

Setting up libaldmb1 (1:0.9.3-5) …

Setting up kraptor-data (0.0.20040403-4) …

Setting up kraptor (0.0.20040403-4) …

Processing triggers for libc6 …

ldconfig deferred processing now taking place

taufanlubis@toshiba:~$

How to play?

  • From Ubuntu Terminal screen (Applications > Accessories > Terminal), type: kraptor

  • Moving: LEFTArrow, RIGHTArrow, UPArrow and DOWNArrow.

  • Fire: z,x,c and space bar.

  • Weapon: You have to select at the first time you start the game. There are rockets, massive bomb, canon machine gun etc.

  • You can save and reload the game.

  • Exit: from menu Game choose Exit Game.

linux-game-kraptor.jpg

Read Full Post »

From Ubuntu Terminal screen (Applications > Accessories > Terminal), type:

taufanlubis@toshiba:~$ sudo apt-get install supertux

Reading package lists… Done

Building dependency tree

Reading state information… Done

The following extra packages will be installed:

libphysfs-1.0-0 supertux-data

The following NEW packages will be installed:

libphysfs-1.0-0 supertux supertux-data

0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.

Need to get 37.7MB of archives.

After unpacking 54.9MB of additional disk space will be used.

Do you want to continue [Y/n]? y

Get:1 http://archive.ubuntu.com gutsy/universe libphysfs-1.0-0 1.0.0-5 [41.6kB]

Get:2 http://archive.ubuntu.com gutsy/universe supertux-data 0.3.0-0ubuntu2 [37.0MB]

Get:3 http://archive.ubuntu.com gutsy/universe supertux 0.3.0-0ubuntu2 [648kB]

Fetched 37.7MB in 6m21s (98.7kB/s)

Selecting previously deselected package libphysfs-1.0-0.

(Reading database … 119904 files and directories currently installed.)

Unpacking libphysfs-1.0-0 (from …/libphysfs-1.0-0_1.0.0-5_i386.deb) …

Selecting previously deselected package supertux-data.

Unpacking supertux-data (from …/supertux-data_0.3.0-0ubuntu2_all.deb) …

Selecting previously deselected package supertux.

Unpacking supertux (from …/supertux_0.3.0-0ubuntu2_i386.deb) …

Setting up libphysfs-1.0-0 (1.0.0-5) …

Setting up supertux-data (0.3.0-0ubuntu2) …

Setting up supertux (0.3.0-0ubuntu2) …

Processing triggers for libc6 …

ldconfig deferred processing now taking place

taufanlubis@toshiba:~$

How to play?

  • Open Applications > Games > SuperTux

  • Moving: Left (LEFTarrow), Right (RIGHTarrow), Jump (Spacebar)

  • Trick: When see enemies, jump over and smash them with your body.

linux-game-supertux.png

 

Read Full Post »

Openarena is a free death match game based on Quake III Arena source, much similar to Open Quartz.

Installation

From Ubuntu Terminal screen (Applications > Accessories > Terminal), type:

taufanlubis@toshiba:~$ sudo apt-get install openarena

Reading package lists… Done

Building dependency tree

Reading state information… Done

The following packages were automatically installed and are no longer required:

liballegro4.2 conquest-libs overgod-data

Use ‘apt-get autoremove’ to remove them.

The following extra packages will be installed:

openarena-data

The following NEW packages will be installed:

openarena openarena-data

0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.

Need to get 271MB of archives.

After unpacking 275MB of additional disk space will be used.

Do you want to continue [Y/n]? y

Get:1 http://archive.ubuntu.com gutsy-backports/universe openarena-data 0.7.1-1~gutsy1 [271MB]

Get:2 http://archive.ubuntu.com gutsy-backports/universe openarena 0.7.0-2~gutsy1 [713kB]

Fetched 256MB in 42m23s (101kB/s)

Selecting previously deselected package openarena-data.

(Reading database … 125508 files and directories currently installed.)

Unpacking openarena-data (from …/openarena-data_0.7.1-1~gutsy1_all.deb) …

Selecting previously deselected package openarena.

Unpacking openarena (from …/openarena_0.7.0-2~gutsy1_i386.deb) …

Setting up openarena-data (0.7.1-1~gutsy1) …

Setting up openarena (0.7.0-2~gutsy1) …

taufanlubis@toshiba:~$

How to play?

  • From Ubuntu Terminal screen (Applications > Accessories > Terminal), type: openarena

  • Moving: Left (a), Right (d), Forward (w), Backward (s).

  • Targeting: Mouse pointer

  • Fire: Click on Left Mouse Button.

  • Take weapon: Just move a weapon in front of you.

  • Use your mouse to choose a menu.

  • Quit: press ESC and choose EXIT.

linux-game-openarena.png

Read Full Post »

It’s an educational typing tutor for children.

Installation

From Ubuntu Terminal screen (Applications > Accessories > Terminal), type:

taufanlubis@toshiba:~$ sudo apt-get install tuxtype

Reading package lists… Done

Building dependency tree

Reading state information… Done

The following extra packages will be installed:

tuxtype-data

Suggested packages:

tuxtype-data-nonfree

The following NEW packages will be installed:

tuxtype tuxtype-data

0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.

Need to get 6813kB of archives.

After unpacking 8880kB of additional disk space will be used.

Do you want to continue [Y/n]? y

Get:1 http://archive.ubuntu.com gutsy/main tuxtype-data 1.5.6.dfsg1-3ubuntu4 [6752kB]

Get:2 http://archive.ubuntu.com gutsy/main tuxtype 1.5.6.dfsg1-3ubuntu4 [60.6kB]

Fetched 6813kB in 1m12s (94.4kB/s)

Selecting previously deselected package tuxtype-data.

(Reading database … 121605 files and directories currently installed.)

Unpacking tuxtype-data (from …/tuxtype-data_1.5.6.dfsg1-3ubuntu4_all.deb) …

Selecting previously deselected package tuxtype.

Unpacking tuxtype (from …/tuxtype_1.5.6.dfsg1-3ubuntu4_i386.deb) …

Setting up tuxtype-data (1.5.6.dfsg1-3ubuntu4) …

Setting up tuxtype (1.5.6.dfsg1-3ubuntu4) …

taufanlubis@toshiba:~$

How to play?

  • Open Applications > Games > Tuxtyping

linux-game-tuxtype.jpg

Read Full Post »

It’s a space invader like game with additional features to produce more interesting game.

Installation

From Ubuntu Terminal screen (Applications > Accessories > Terminal), type:

taufanlubis@toshiba:~$ sudo apt-get install xgalaga

Reading package lists… Done

Building dependency tree

Reading state information… Done

The following NEW packages will be installed:

xgalaga

0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.

Need to get 264kB of archives.

After unpacking 811kB of additional disk space will be used.

Get:1 http://archive.ubuntu.com gutsy/universe xgalaga 2.0.34-44ubuntu1 [264kB]

Fetched 264kB in 3s (78.2kB/s)

Selecting previously deselected package xgalaga.

(Reading database … 119343 files and directories currently installed.)

Unpacking xgalaga (from …/xgalaga_2.0.34-44ubuntu1_i386.deb) …

Setting up xgalaga (2.0.34-44ubuntu1) …

taufanlubis@toshiba:~$

How to play?

  • Open Applications > Games > XGalaga – Hyperspace

  • Moving: Left (LEFTarrow) and Right (RIGHTarrow).

  • Fire: Spacebar

  • Exit: q

linux-game-xgalaga.gif

Read Full Post »

Pysol is a free game most like Solitaire.

From Ubuntu Terminal screen (Applications > Accessories > Terminal), type:

taufanlubis@toshiba:~$ sudo apt-get install pysol

Reading package lists… Done

Building dependency tree

Reading state information… Done

The following extra packages will be installed:

blt python-tk tcl8.4 tk8.4

Suggested packages:

blt-demo pysol-cardsets tix tclreadline

The following NEW packages will be installed:

blt pysol python-tk tcl8.4 tk8.4

0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.

Need to get 5212kB of archives.

After unpacking 17.0MB of additional disk space will be used.

Do you want to continue [Y/n]?y

Get:1 http://archive.ubuntu.com gutsy/main tcl8.4 8.4.15-1build1 [1169kB]

Get:2 http://archive.ubuntu.com gutsy/main tk8.4 8.4.15-1ubuntu1 [1002kB]

Get:3 http://archive.ubuntu.com gutsy/main blt 2.4z-4 [1504kB]

Get:4 http://archive.ubuntu.com gutsy/main python-tk 2.5.1-1ubuntu1 [42.1kB]

Get:5 http://archive.ubuntu.com gutsy/universe pysol 4.82.1-4.1ubuntu6 [1494kB]

Fetched 5212kB in 1m38s (52.8kB/s)

Selecting previously deselected package tcl8.4.

(Reading database … 115892 files and directories currently installed.)

Unpacking tcl8.4 (from …/tcl8.4_8.4.15-1build1_i386.deb) …

Selecting previously deselected package tk8.4.

Unpacking tk8.4 (from …/tk8.4_8.4.15-1ubuntu1_i386.deb) …

Selecting previously deselected package blt.

Unpacking blt (from …/archives/blt_2.4z-4_i386.deb) …

Selecting previously deselected package python-tk.

Unpacking python-tk (from …/python-tk_2.5.1-1ubuntu1_i386.deb) …

Selecting previously deselected package pysol.

Unpacking pysol (from …/pysol_4.82.1-4.1ubuntu6_all.deb) …

Setting up tcl8.4 (8.4.15-1build1) …

Setting up tk8.4 (8.4.15-1ubuntu1) …

Setting up blt (2.4z-4) …

Setting up python-tk (2.5.1-1ubuntu1) …

Setting up pysol (4.82.1-4.1ubuntu6) …

Processing triggers for libc6 …

ldconfig deferred processing now taking place

taufanlubis@toshiba:~$

How to play?

  • Open Applications > Games > PaySol

  • The game is very simple. There 4 empty boxes on the top right. Just fill 4 of them with all available cards.

  • You have to start with Ace then continued with 2,3,4,5,6,7,9,10,JOCKER,QUEEN and the last one is KING. But the card must in same pattern.

  • You can use mouse to drag the card or double click it when put into the top right 4 boxes.

linux-game-pysol01.png

linux-game-pysol03.png

Read Full Post »

« Newer Posts - Older Posts »

Follow

Get every new post delivered to your Inbox.

Join 76 other followers